|
|
|
|
|
|
Sheldon Machine Heater and A/C block offs
|
|
|
Billet fire wall block off plates. One for the a/c hole one for the heater hose hole. A/C box must be completely removed. Mounts directly to fire wall. Brushed finish.
|
|
|
|
|
|
|
|
|
|
Realtune Neon Head gasket
|
|
|
Realtune 5 layer Head gasket for your Neon SRT4. Our head gaskets are used on all of our builds! Judging by our stable of cars, you can be secure in knowing your purchase is the right choice!
|
|
|
|
|
|
|
|
|
|
AGP Dog bone Motor mounts
|
|
|
The factory engine mounts for the SRT-4/PT Cruiser GT are inadequate for even a stock car. Upgrade to the AGP Solid Mount kit and eliminate your wheel hop. This kit is absolutely necessary for a modified SRT-4/PT Cruiser GT, and can improve drivability and will definitely cut down your quarter mile times. The kit includes a solid upper mount, solid lower mount, and washers for the top and bottom. Available in black and silver powdercoated finish.
|
|
|
|
|
|
|
|
|
|
Realtune Billet Tone Wheel (trigger wheel)
|
List Price: $185.00 Our Price: $165.00 You save $20.00!
|
|
|
*currently in stock!
The NSRT4 community has asked me numerous times over the years to make a billet tone wheel for the prone to breaking factory wheel. After years of requests I have finally decided to make it happen for you guys.
Simply put, these wheels will not shatter like the factory wheels "can" and with the improvement over factory mounting, the bolts are less prone back out as well!
* Includes mounting bolts
|
|
|
|
|
|
|
|
|
|
Realtune NSRT4 Billet Oil pump gears
|
|
|
*Price includes shipping in the USA!
Do not let what you see in the picture happen to you! Factory oil pump gears are prone to breakage and now with the insanely high cost of factory oil pumps....the timing is right to bring back billet oil pump gears vs. treating the stock gears! Support the guys that did the leg work in bringing this to the market to help us bring more items and manufacturers to the market!
- Billet construction
- treated as well, not just raw
- limited lifetime warranty!
*Please allow 2-4 business days to ship
|
|
|
|
|
|
|
|
|
|
EAGLE forged H-Beam rods
|
|
|
Eagle rods have been performing flawlessly in street and strip motors for years. There proprietary forged H-Beam design is not only one of the strongest designs available, but its one of the lightest also. Being able to rev quickly is the major advantage of this H-Beam rod. Being able to be rated right out of the box to 600 Wheel Horsepower is the Eagle rods killer feature.
Every Eagle rod is heat treated for durability in a racing engine, they are then stress relieved for superior rigidity, and then machined for final fitment and 100% dead on tolerances.
Specifications
Rod Length: 5.945"
Design: Forged H-Beam
Fasteners: ARP 3/8" 2000 Series Rod Bolts
|
|
|
|
|
|
|
|
|
|
Realtune Neon SRT4 L19/H11 head studs
|
Our Price: $375.00 Sale Price: $350.00 You save $25.00!
|
|
|
** Currently out of stock! **
The Ultimate Neon SRT4 Headstuds!
Introducing the L19/H11 racing studs from Realtune Performance. If you want a stud that will take anything you can toss at them, look no further.
Same material used on all of the big boy Realtune Neon and Caliber builds!
*Photo is a stock photo
|
|
|
|
|
|
|
|
|
|
Brian Crower stage 2 cams
|
|
|
Brian Crower SRT-4 Street/Strip Specification Cams
Street/Strip Specification Plug and play application. Short duration for nice street manners, slight lope at idle. Excellent all purpose spec. OEM springs are OK, but a spring and retainer kit is highly recommended!
Brian Crower Cam # - BC-0161
Advertised Duration - 264/264 Degree
Duration @ .050" - 186/184 Degree
LIFT (Inches) - .350"/.310"
LIFT (mm) - 8.89/7.87mm
Works well with Brian Crower Spring and Retainer Kit # BC-0160
Cold Valve Lash: .000" Int / .000" Exh
|
|
|
|
|
|
|
|
|
|
Brian Crower stage 3 cams
|
|
|
Brian Crower SRT-4 Street/Strip/Race Specification Cams
Longer duration profile, added rpm potential. Intended for fully built engine. Tuning and ECU mods recommended. Requires Brian Crower Spring and Retainer kit # BC-0160.
Brian Crower Cam # - BC-0162
Advertised Duration - 272/272 Degree
Duration @ .050" - 194/186 Degree
LIFT (Inches) - .389"/.383"
LIFT (mm) - 9.88/9.73mm
Works well with Brian Crower Spring and Retainer Kit # BC-0160
Cold Valve Lash: .000" Int / .000" Exh.
|
|
|
|
|
|
|
|
|
|
Realtune 625 Head studs
|
|
|
*This is a pre-order. Expect a 10-12 week lead time as of 11-12-19*
The ultimate Neon SRT4 head studs! Made from custom aged 625 material that surpasses L19/H11 in strength and ease of handling.
*picture may be a stock photo and not necessarily represent the actual item
|
|
|
|
